Typface Kafka MX Keyboard

Discount Code Restrictions: loyalty codes are not eligible for this purchase Free shipping is not eligible for this product Important to note: This is a short pre-order, not an in-stock item. All units will be shipped out after the production is finished. The following timeline is our best estimation but is subject to change if affected by unexpected events. By placing an order, you acknowledge that this product is a pre-order / not in stock and have read the estimated timeline below. This item is a groupbuy! GB Start Date: January 28, 2026 GB End Date: February 22, 2026 Estimated Fulfillment Time: June-July 2026

Included in each MX kit (soldered & hot-swap):

• Case x1 (Aluminium & Brass)
• Accent x1
• MX PCB x1 (Soldered/Hot-swap)
• Weight x1 (Brass)
• Plate x1 (Aluminium)
• Feet x4 (Black)
• O-ring 205*3.5mm x1 (50A Silicone)
• Plate Gasket x5 (60A Silicone)
• Carrying Case x1
• Fly Daughterboard x1
• EZmate-JST 150mm cable x1
• Hardware (Pre-installed)

PCB Details

• Soldered MX PCB
  • Web-based firmware (https://vial.rocks/)
  • Microcontroller: RP2040
  • 1.6mm thick
  • No per-key RGB
  • NKRO: Yes
  • Connector: JST-SH 4 Pin

Layout compatibility:

• Hot-swap MX PCB (ANSI)
  • Web-based firmware (https://vial.rocks/)
  • Microcontroller: RP2040
  • 1.6mm thick
  • No per-key RGB
  • NKRO: Yes
  • Connector: JST-SH 4 Pin

Layout compatibility:

• Hot-swap MX PCB (ISO)
  • Web-based firmware (https://vial.rocks/)
  • Microcontroller: RP2040
  • 1.6mm thick
  • No per-key RGB
  • NKRO: Yes
  • Connector: JST-SH 4 Pin

Layout compatibility:

Typing Feel & Acoustics

---

Kafka can be configured with two different mounting styles. Each of these will have its unique type feel and sound signature.

Plate Gaskets:

This configuration provides a solid type feel and bassy sound signature. It is the more muted configuration between the two.

O-ring Gasket:

This configuration provides a responsive and bouncier type feel and has a distinctively higher pitch and brighter sound signature.

 

Materials & Natural Variation

---

Kafka uses the following materials:

• Walnut/Maple
• PC
• Brass

Natural variances and changes in these materials are to be expected.

Below are specific notes for some of the materials used in the Kafka:

Wood Components

• Wood is a natural material and will vary in:
  • Grain pattern
  • Colour
  • Texture
• Small knots, mineral streaks, or natural figuring may be present.
• Minor changes due to temperature and humidity are normal.
• Any variations that do not affect the assembly will not be considered as defects.

PC Components

• PC materials may show faint surface marks.
• These marks are normal and not considered scratches.
• PC material may yellow over time due to environmental exposure.

Brass Components

• Brass may naturally oxidise over time.
• Protective coatings are applied, but light oxidation may still occur during transport or use.
• Light oxidation is considered normal and not a quality defect.

 

Quality Control (QC) Standards

---

Kafka units are inspected according to defined QC standards before shipment.

• QC applies to external, visible surfaces and functional components.
• Internal surfaces or areas not visible during normal use are not considered for cosmetic QC.
• Minor cosmetic imperfections that do not affect function or durability are acceptable.

A unit is considered defective only if:

• There is a functional failure, or
• There is cosmetic marks larger than 1×1mm on visible exterior surfaces.

---

Exchanges, Refunds & Warranty

---

• Exchanges or refunds are offered only in cases of confirmed manufacturing defects.
• Change-of-mind returns are not accepted.
• Units must be inspected within 7 days of delivery.
• Proof of defects (photos and/or unboxing video) is required for any claim.
• PCB warranty claims require proof of DOA or functional defect.

Full details will be provided by your regional vendor.

 

requently Asked Questions

---

Q: Why does my unit look slightly different from others online?

A: Kafka uses natural and semi-natural materials. Variations in grain, colour, and finish are expected.

Q: Is VIA supported?

A: The hall-effect PCB utilises Geon’s Venom configurator instead of VIA. Our MX-compatible PCBs will be Vial-compatible.

Q: Can I cancel my pre-order?

A: Cancellation policies are determined by each regional vendor. Please check before ordering.

Q: When will shipping dates be confirmed?

A: Shipping timelines are estimated to be 4 months after pre-order closes.